How to Make Your Own Dog Mask – The Basics

In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it is actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so you get something that looks like a cone. The most important thing here is to be realistic with http://franklinpaintingnj.com/?p=25387 what kind of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can make certain that nothing will leak when you put the mask on. Make sure that the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so you don’t end up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Be sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it could look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure that the ears are flat and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask as your pet security, you will have to do some sanding to make sure that it’s secure on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.

Leave a Reply